Fully Polished Kodiak Handle kit

To change your door handles over to these robust kodiak door handles, you must have atleast a  flat head screwdriver, phillips screw driver, a 10mm with an extension, a ratchet and some patience. 

Step 1: Make sure your window is all the way up.

Step 2: Remove both the door handle trim, power window controls, and the mirror trim pieces.

Step 3: Start gently pulling the door panel away from the door. 

Step 4: Remove the interior light out of the door. 

Step 5: Lift the door panel up to separate it from the door. 

Step 6: Remove the 2 10mm bolts holding the door handle in.

Step 7: Remove the door handle and remove your locks out of your door handles. ( The lock cylinders have to be swapped from L - R ) 

Step 8: Install supplied lock rod and latch rods onto your new handles. 

Step 9: Remove old latch clips and install new ones

Step 10: Fit up the kodiak handle, slide the latch rod into the latch mechanism and push the lock rod onto the lock clip.

Repeat steps 2-7 in reverse.